Kyocera KM-3035 Operation Manual page 188

Section 7 COPIER MANAGEMENT FUNCTIONS
● Original set direction
Perform the following procedure to designate the default setting for
the original set direction.
1 Display the "Machine default" screen.
(See "(2) Accessing the machine default settings" on
page 7-41.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
2 Select "Orig. set direction" in the settings list on the left side
of the touch panel and then touch the "Change #" key.
The "Orig. set direction" screen will be displayed.
Inch specifications
Default setting / Counter
Machine default
Default menu
Paper type (4th drawer)
Check bypass sizing
Select paper type (2sided)
Special paper action mode
Orig. set direction
Default setting
Metric specifications
Default setting / Counter
Machine default
Default menu
Paper type (4th cassette)
Check bypass sizing
Select paper type (2sided)
Specif. paper action mode
Orig. set direction
Default setting
7-46-2
Language Management
Bypass BOX
setting Management
Register Print
orig. size report
Language Management
Bypass Hard Disk
setting Management
Register Print
orig. size report
Setting mode
Plain
Off
Speed priority
Rear
Change #
Setting mode
Plain
Off
Speed priority
Back Edge Change #
3 Select either "Rear" ["Back Edge"] or "Left top corner".
Inch specifications
Orig. set direction
Default setting - Machine default
Metric specifications
End
Orig. set direction
Counter
check
User
Adjustment
Default setting - Machine default
End
NOTE
Counter
If you want to quit the displayed setting without changing it, touch the
check
"Back" key. The touch panel will return to the screen in step 2.
User
Adjustment
4 Touch the "Close" key. The touch panel will return to the
screen in step 2.
5 Touch the "Close" key once again. The touch panel will return
to the "Default setting" screen.
Close
6 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Up
Down
Close
Up
Down
Select default mode for Original set direction.
Rear or Left top corner.
Rear
Left top
corner
Select default mode for Original set direction.
Back Edge or Left top corner.
Back Edge
Left top
corner
Back Close
Back Close