The "Print Status" Screen; Job Queue - Kyocera KM-3035 Operation Manual

Section 6 DOCUMENT AND OUTPUT MANAGEMENT FUNCTIONS

(3) The "Print status" screen

This screen displays the currently set printing conditions and the job queue of documents waiting to be printed.
Inch specifications
1
Print management
Job Input source Original
123 Copy
124 Printer
127 Fax
128 Copy
Move Move
ahead behind
Prt status
2 3

1 Job queue

Displays information about each job in the queue.
The job at the top of the list is that job that is currently being
printed. The rest of the jobs will be printed in order from the top
down.
A " " icon under the "Job" heading indicates a copy job, a "
icon indicates a print job, and a "
2 "Move ahead" key
Touching this key moves the currently selected (highlighted) job
upward in the job queue. A job can be moved as far as the second
highest position in the list. In this case, print out for that job will
begin as soon as the current job is completed. (This is only
available when the optional Hard Disk is installed on this copier.)
3 "Move behind" ["Move down"] key
Touching this key moves the currently selected (highlighted) job
downward in the job queue. (This is only available when the
optional Hard Disk is installed on this copier.)
4 "Interrupt print" key
Touching this key interrupts the job that is currently being printed
and start print out for the currently selected (highlighted) job. (The
selected job will be moved to the top of the list.)
5 "Cancel/Delete" key
Touching this key cancels the currently selected (highlighted) job
and deletes it from the job queue. (This is only available when the
optional Hard Disk is installed on this copier.)
6-22
8
Set Registration State
10/10 23:00
100 100 Printing
_ _ _ _ _ _ _ _ _ Waiting
_ _ _ _ _ _ _ _ _ Waiting
1 5 10/10 23:00 Waiting
interrupt Cancel/ Conf/Crrt.
print Delete details
10/10 23:50
4 5 6
" icon indicates a fax job.
Metric specifications
7 1
End Print management
Job
123
124
127
128
Move
up
Prnt status
2
6 "Conf/Crrt.details" ["Check/Rev. details"] key
Touching this key displays the "Check/Correct details" ["Check/
revise details"] screen, enabling you, for example, to check the
contents of, or change the number of copies to be made for, the
currently selected (highlighted) job. (This is only available when
" the optional Hard Disk is installed on this copier.)
Inch specifications
Check/Correct details
Orig. page
Set
Print size
Input source
Registration date
Job 5
Metric specifications
Check/revise details
Original
Set
Print size
Input source
Registration date
Job 5
7 "M" and "N" cursor keys
Use these keys to select a job from the job queue.
8 "End" key
Touching this key quits the output management function. In this
case, the touch panel will return to the contents of the "Basic" tab.
Input source Original Set Registration
100 100 10/10 23:00
Copy
Printer _ _ _ _ _ _ _ _ _
Fax _ _ _ _ _ _ _ _ _
1 5 10/10 23:00
Copy
Move interrupt Cancel /
down print Delete
3 4 5
Item Details
1
1
11x8 "
1 /
2
Copy
11/01 15:31
Item Details
1
1
A4
Copy
11/01 15:31
8 7
End
State
Printing
Waiting
Waiting
Waiting
Check/ Rev.
details
10/10 23:50
6
Close
Change
Preset
Close
Change
Preset