Kyocera KM-3035 Operation Manual page 200

Section 7 COPIER MANAGEMENT FUNCTIONS
● Changing the energy-saving mode
Perform the following procedure to change the energy-saving mode
(the Low power mode or the Sleep mode) that will be entered into
when the [Energy Saver] key is pressed.
1 Display the "Machine default" screen.
(See "(2) Accessing the machine default settings" on
page 7-41.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
2 Select "Energy Saver key setting" in the settings list on the
left side of the touch panel and then touch the "Change #"
key.
The "Energy Saver key setting" screen will be displayed.
Inch specifications
Default setting / Counter
Machine default
Default menu
Date/Time
Time difference
Management code change
Auto sleep
Energy Saver key setting
Metric specifications
Default setting / Counter
Machine default
Default menu
Date/Time
Time difference
Change MGMT code with #
Auto sleep
Energy Saver key setting
Default setting
7-58
Language Management
Bypass BOX
setting Management
Register Print
orig. size report
Language Management
Bypass Hard Disk
setting Management
Register Print
orig. size report
Setting mode
2001/10/30 14:02
GMT+08:00
5000
On
Low power mode Change #
Setting mode
30/10/'01 14:02
GMT+08:00
5000
On
Low power mode Change #
3 Touch the "Low power mode" key or the "Sleep mode" key, as
desired.
Inch specifications
Energy Saver key setting
Default setting - Machine default
Metric specifications
End
Energy Saver key setting
Counter
check
User
Adjustment
Default setting - Machine default
End
NOTE
Counter
check
If you want to quit the displayed setting without changing it, touch the
User
Adjustment
"Back" key. The touch panel will return to the screen in step 2.
4
Touch the "Close" key. The touch panel will return to the
screen in step 2.
5 Touch the "Close" key once again. The touch panel will return
to the "Default setting"screen.
Close
6 Touch the "End" key. The touch panel will return to the
Up
contents of the "Basic" tab.
Down
Close
Up
Down
When pressing Energy Saver key, state can be set.
Low power
mode
Sleep
mode
When pressing Energy Saver key, state can be set.
Low power
mode
Sleep
mode
Back Close
Back Close