Kyocera KM-3035 Operation Manual page 258

Section 8 OPTIONAL EQUIPMENT
* Sorted copies are ejected to the Sort tray.
* When setting large size paper such as 8
pull out the support extension.
1 1 1 Refilling the Stapling Unit 1 1
1 Open the stapler front cover towards you.
2 Pull out the staple holder.
8-10
" x 11", A4R or larger,
1/2
3 Remove the empty staple cartridge from the staple holder.
4 Hold the staple holder in one hand and the new staple
cartridge in the other and insert the new staple cartridge
making sure the direction of insertion is correct.
* The arrow on the staple cartridge indicates the correct
direction of insertion.
5 Make sure the new staple cartridge is completely inserted all
the way into the staple holder and then remove the paper
tape covering the staple cartridge.
6 Replace the staple holder back in its original position in the
Stapling Unit. Once it has been fully inserted, it will click into
place.