Kyocera KM-3035 Operation Manual page 126

Section 6 DOCUMENT AND OUTPUT MANAGEMENT FUNCTIONS
6 Touch the "Select orig. size" ["Select size orig."] key, the
"Select regi. size" key, the "Original type" key, the "Reduce/
Enlarge" key and/or the "Orig.set direction" key, if you want to
perform the corresponding settings.
If you want to access the "Scanning density" key and/or the
"Orig.image quality" ["Image quality"] key to make those
settings, touch the "Quality" key.
If you want to set access the "Border Erase" ["Erase Mode"]
key and/or the "Continuous scanning" ["Multiple scanning"]
key to make those settings, touch the "Edit" key.
7 Press the [Start] key. Scanning of the documents will start.
Once all of the documents have been completely scanned,
the touch panel will return to the screen in step 3.
If you want to register another document, repeat steps 3
through 7.
8 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
6-10
2 Combining and printing out stored documents
Perform the following procedure when you want to combine and print
out documents that are stored in a synergy print box.
1 Press the [Document Management] key. The "Document
Management" screen will be displayed.
2 Touch the "Document printing" key under "Synergy Print
Box". The screen to select the synergy print box will be
displayed.
Inch specifications
Select function.
Document Management
Shared Data Box
Document Document
reg. printing
Box
Editing
Metric specifications
Select function.
Document Management
Shared Data Box
Document Document
registr. printing
Box
Editing
25/10/'01 19:20
Synergy Print Box Form box
Form
Document Document
reg. printing reg.
Box Box
Editing Editing
25/10/'01 19:20
Synergy Print Box Form box
Document Document
Form
registr. printing
registr.
Box Box
Editing Editing
End
End