Kyocera KM-3035 Operation Manual page 146

Section 7 COPIER MANAGEMENT FUNCTIONS
Copying privileges ON/OFF
Perform the following procedure when you want to turn copying
privileges ON or OFF for the corresponding department ID-code.
NOTE
This setting will only be available when "On" is selected as the "Copier
function management ON/OFF" setting.
1 Access the screen that contains the copy restriction setting
items. (See "Register new department ID-codes" on page 7-4
or "Change restrictions for use" on page 7-20.)
Inch specifications
Management edit
Department
01 1st Sales Dept.
02 2nd Sales Dept.
0001 3rd Sales Dept.
0014 4th Sales Dept.
00000015 5th Sales Dept.
00000016 6th Sales Dept.
00000017 7th Sales Dept.
Default setting - Management
Metric specifications
Management edit
Department
01 1st Sales Dept.
02 2nd Sales Dept.
0001 3rd Sales Dept.
0014 4th Sales Dept.
00000015 5th Sales Dept.
00000016 6th Sales Dept.
00000017 7th Sales Dept.
Default setting - Management
2
Select "Copy limitation" under the "Setting item" column on
the left side of the touch panel and then touch the "Change #"
key.
The "Copy limitation" screen will be displayed.
Inch specifications
Limit in use
0007 1st Sales Dept.
Setting item
Copy limitation
Printer limitation
Output limitation
Scanner limitation
Fax Transm. Limitation
Default setting - Management - Management edit
Metric specifications
Limit in use
0007 1st Sales Dept.
Setting item
Copy limitation
Printer limitation
Output limitation
Scanner limitation
Fax Transm. Limitation
Default setting - Management - Management edit
7-8
Order of
Up
indication
Mgt. Inf.
correction
Delete
Down
Register
001/010
Order of
Up
indication
Mgt. Inf.
correction
Delete
Down
Register
001/010
Value
On
On
No limit
No limit
No limit
Change #
Value
On
On
No limit
No limit
No limit
Change #
3 To allow copying privileges for this ID-code, touch the "Can
use" key. To cancel copying privileges completely, touch the
"Is not permitted" key.
Inch specifications
Copy limitation
Can use
Is not
permitted
Management - Management edit - New register
Metric specifications
Copy limitation
Close
Can use
Is not
Limit
permited
in use
Management - Management edit - New register
NOTE
If you want to quit the displayed setting without changing it, touch the
Close
"Back" key. The touch panel will return to the screen in step 2.
Limit
in use
4
Touch the "Close" key.
The touch panel will return to the screen in step 2.
Close
Close
Back Close
Back Close