Kyocera KM-3035 Operation Manual page 227

● Customize screen layout (Main functions)
Perform the following procedure to change the order of the main
functions and modes that are displayed in the "Basic" and the "User
choice" tabs in order to make the display more appropriate to the way
you use the copier.
1 Display the "Copy default" screen.
(See "(5) Accessing the copy default settings" on page 7-62.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
2 Select "Customize(Main function)" in the settings list on the
left side of the touch panel and then touch the "Change #"
key.
The "Customize(Main function)" screen will be displayed.
Inch specifications
Default setting / Counter
Copy default
Default menu
Preset limit
Modify Copy
Display register key
Customize(Main function)
Customize(Add function)
Default setting
Metric specifications
Default setting / Counter
Copy default
Default menu
Preset limit
Modify copy
Display"Register"key
Customize(Main function)
Customize(Add function)
Default setting
Language Management
Bypass BOX
setting Management
Register Print
orig. size report
Language Management
Bypass Hard Disk
setting Management
Register Print
orig. size report
Setting mode
999 Set
On / Default Off
On
Change #
Setting mode
999 Set
On / Default Off
On
Change #
Section 7 COPIER MANAGEMENT FUNCTIONS
3 If you want to change the order of the basic functions and
modes, touch the "▲" or the "▼" cursor key to select the item
you want to move. Then touch the "Move ahead" key or the
"Move behind" ["Move backward"] key to move that item and
change the order of display. The final display of the basic
functions and modes will be in accordance with the numbers
in the list and those shown in the tabs to the left of that list.
Inch specifications
Customize(Main function)
Basic
End
User choice
Counter
check
Default setting - Copy default
User
Adjustment
Metric specifications
Customize(Main function)
Basic
End User choice
Counter
check
Default setting - Copy default
User
Adjustment
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 2.
4
Touch the "Close" key. The touch panel will return to the
screen in step 2.
Close
5 Touch the "Close" key once again. The touch panel will return
to the "Default setting"screen.
Up
Down
6
Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Close
Up
Down
Back Close
Register mode
Move
Ahead
Reduce/Enlarge
Sort/Finished
Move
1/2 sided
Behind
Original size
Orig. quality
Back Close
Register mode
Move
ahead
Reduce/Enlarge
Sort/Finished
Move
1/2 sided
backward
Original size
Quality orig
7-85