Making Machine Default Settings - Kyocera KM-3035 Operation Manual

Section 7 COPIER MANAGEMENT FUNCTIONS

(3) Making machine default settings

Perform the following procedure that corresponds to the desired
setting.
● Auto drawer[cassette] switching ON/OFF
Perform the following procedure to turn automatic drawer[cassette]
switching ON or OFF, as desired.
1 Display the "Machine default" screen.
(See "(2) Accessing the machine default settings" on
page 7-41.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
2 Select "Auto drawer switching" ["Auto cassette switching"] in
the settings list on the left side of the touch panel and then
touch the "Change #" key.The "Auto drawer switching" ["Auto
cassette switching"] screen will be displayed.
Inch specifications
Default setting / Counter
Machine default
Default menu
Auto drawer switching
Paper size (1st drawer)
Paper size (2nd drawer)
Paper size (3rd drawer)
Paper size (4th drawer)
Default setting
Metric specifications
Default setting / Counter
Machine default
Default menu
Auto cassette switching
Paper size (1st cassette)
Paper size (2nd cassette)
Paper size (3rd cassette)
Paper size (4th cassette)
Default setting
7-42
Language Management
Bypass BOX
setting Management
Register Print
orig. size report
Language Management
Bypass Hard Disk
setting Management
Register Print
orig. size report
Setting mode
On / All types of paper
Auto / Inch
Auto / Inch
Auto / Inch
Auto / Inch Change #
Setting mode
On / All types of paper
Auto / Centimeter
Auto / Centimeter
Auto / Centimeter
Auto / Centimeter Change #
3 Touch the "On" key to automatic drawer[cassette] switching
ON.
Inch specifications
Auto drawer switching
Default setting - Machine default
Metric specifications
Auto cassette switching
End
Counter
check
User
Default setting - Machine default
Adjustment
4 In order to prevent a drawer[cassette] that holds a different
type of paper from being switched to when the automatic
drawer[cassette] switching function is turned ON, touch the
"Feed same paper type" key under "Paper type".
End
NOTE
Counter
check
User
If you want to quit the displayed setting without changing it, touch the
Adjustment
"Back" key. The touch panel will return to the screen in step 2.
5 Touch the "Close" key. The touch panel will return to the
screen in step 2.
6 Touch the "Close" key once again. The touch panel will return
to the "Default setting"screen.
Close
7 Touch the "End" key. The touch panel will return to the
Up
contents of the "Basic" tab.
Down
Close
Up
Down
When paper drawer is empty, switch to another one,
set same size/direction paper, and continue copying.
Function Paper type
All types
On
of paper
Feed same
Off
paper type
When paper cassette is empty, switch to another one,
set same size/direction paper, and continue copying.
Paper type
Function
All types
On
of Paper
Feed same
Off
paper type
Back Close
Back Close