Table Of Contents - Danfoss iC7 Series Installation Manual

Installation Guide | iC7 Series Liquid-cooled System Modules
Contents
Overview
1
1.1 Safety and Installation Awareness
1.2 Checking the Delivery and the Contents
1.3 Unpacking the Product
1.4 Lifting the System Modules
1.5
Lifting the System Modules with Integration Unit
1.6 Lifting the Filters
Mechanical Installation
2
2.1 Installation Requirements
2.2 Installation Directions
2.3 Installing System Modules
2.3.1 Installing System Modules into a Cabinet Vertically
2.3.2 Installing System Modules into a Cabinet Horizontally
2.3.3 Installing System Modules into a Cabinet on their Backsides
2.4 Installing System Modules with Integration Units
2.4.1 Installing System Modules with Integration Units into a Cabinet Vertically
2.4.2 Installing System Modules with Integration Units into a Cabinet Horizontally
2.4.3 Installing System Modules with Integration Units into a Cabinet on their Backsides
2.5 Installing Filters
2.5.1 Installing L Filter into a Cabinet, 400 A, 1000 A
2.5.2 Installing L Filter into a Cabinet, 1640 A
Cooling
3
3.1 Insertion of Pipes into Cooling Circuit Connectors
3.2 Inlet and Outlet Connectors
3.2.1
Inlet and Outlet Connectors of System Modules
3.2.2 Inlet and Outlet Connectors of System Modules with Integration Units
3.2.3 Inlet and Outlet Connectors of the L Filter
3.3 Cooling Circuit Pipes
3.4 Bending the Pipes
3.4.1 Bending Pipes in the Air
3.4.2 Bending Pipes with a Bending Jig
Danfoss Drives Oy © 2024.03 AN389643231588en-000101 / 172F6360A |
7
7
7
8
8
9
10
10
10
10
11
12
13
13
15
16
17
17
17
19
19
19
20
21
21
22
22
23
3