Safety Summary; Product Identification - Intermec EasyCoder PF2i User Manual

Safety Summary

Product Identification

EasyCoder PF2i Bar Code Label Printer User's Guide (Fingerprint Version)
The EasyCoder PF2i supports 15 scalable Unicode TrueType and
TrueDoc fonts as standard. Additional fonts can be downloaded
into the printer's Flash memory, or be plugged in using a
CompactFlash card. The Unicode standard allows the use of
special characters for various languages including non-Latin
fonts, such as Arabic, Cyrillic, Chinese, Japanese, Korean,
Hebrew, and similar.
Intermec assumes no responsibility regarding the CE Directive if
the printer is handled, modified, or installed in any way other
than that described in Intermec's manuals.
• Read this manual carefully before connecting the printer.
• Moving parts are exposed when the side door is open, so
ensure that the door is closed before you operate the printer.
• Do not open the front/left-hand cover. Dangerous voltage!
• Do not remove the bottom plate. Dangerous voltage!
• Do not put your fingers inside the print mechanism when the
power is on.
• Place the printer on an even surface which can support its
weight of approximately 5.5 kg (12 lbs.) plus supplies.
• Do not spray the printer with water. If you are using a hose to
clean the premises in an industrial environment, remove the
printer or protect it carefully from spray and moisture.
• Carefully read the warning text on the envelope before using a
cleaning card.
The machine label is attached to the printer's rear plate and
contains information on type, model, and serial number as well
as AC voltage. It also contains various signs of approval.
Chapter 1 — Introduction
3