External Supply (Fan-Fold) - Intermec EasyCoder PF2i User Manual

External Supply (Fan-Fold)

EasyCoder PF2i Bar Code Label Printer User's Guide (Fingerprint Version)
14 Press the Feed button to advance the media and adjust the
media feed.
The EasyCoder PF2i printer can print on labels, tickets, tags, and
continuous stock in various forms. This section describes the case
when the media supply is placed behind the printer, usually in
the form of fan-folded tickets or tags. External supply can be used
with tear-off (straight-through) printing–preferably with quick-
load.
External supply can be used with both short and long side doors
and there is no need to remove the media supply roll post.
When using an external media supply, take care to protect the
media from dust, dirt or other foreign particles, that can impair
the printout quality or cause unnecessary wear to the printhead.
Depending on brand and quality, all direct thermal media are
more or less sensitive to heat, direct sunlight, moisture, oil,
plasticizers, fat, and other substances. You should protect them
accordingly.
Chapter 4 — Media Load
39