Tear-Off (Straight-Through) - Intermec EasyCoder PF2i User Manual

Chapter 4 — Media Load

Tear-Off (Straight-Through)

26 EasyCoder PF2i Bar Code Label Printer User's Guide (Fingerprint Version)
The EasyCoder PF2i printer can print on labels, tickets, tags, and
continuous stock in various forms. This section describes the case
when the media is torn off manually against the printer's tear bar.
This method is also known as "straight-through printing."
Use the Feed key when loading the same type of media. When
switching to a new type of media, or if the printer does not feed
out the media properly, simultaneously press the Shift and Feed
keys to perform a "testfeed."
Tear-off can be used for:
• Non-adhesive continuous stock
• Self-adhesive continuous stock with liner
• Self-adhesive labels with liner
• Tickets with gaps, with or without perforations
• Tickets with black marks, with or without perforations
An optional label taken sensor can hold the printing of the next
copy in the batch until the present copy has been removed, see
"Label Taken Sensor" on page 91.
To load tear-off media
1 Open the side door.