Intermec Ready-To-Work Indicator - Intermec EasyCoder PF2i User Manual

Chapter 10 — Troubleshooting

Intermec Ready-To-Work Indicator

94 EasyCoder PF2i Bar Code Label Printer User's Guide (Fingerprint Version)
The readiness of the printer, individually or as a part of a
solution, is indicated by the blue Intermec Ready-To-Work
Indicator (IRI).
If the IRI blinks or is switched off, the printer is not ready.
Further information can be obtained in the display window by
pressing the F5/i key. In case of several errors or similar
conditions occurring simultaneously, only the most significant
error is displayed. Once this error has been cleared, next
remaining error is displayed.
The printer will also return error messages to the host, provided
there is a working two-way communication. Refer to the Intermec
Fingerprint v8.xx, Command Reference Manual.
Provided the printer is connected to a network, all conditions
that prevents printing are reported to the Easy ADC Console.
The Easy ADC Console is a PC-based software which allows a
supervisor to monitor all connected devices that have an
Intermec Ready-To-Work Indicator, including handheld
computers, access points, and printers.
Display Messages and LED Indications
Error/Event
Operational
Out of paper
Next label not found
Label not taken
Out of transfer ribbon Blink
Head lifted
Cutter does not
respond
Cutter error1
Cutter error2
Cutter error3
Cutter open
LSS too high
IRI Error No. Comment
On 0 No Error
Blink 1005
Blink 1031
Blink
1027
Blink 1022
Blink 1059
Blink 1701
Blink 1702
Blink 1703
Blink 1704
Blink 1007