Set Mode; I General; D Quick Set Mode Operation; D Initial Set Mode Operation - Icom IC-703 Instruction Manual

I General

Set mode is used for programming infrequently
changed values or conditions of functions. The IC-703
has 2 separate set modes: quick set mode and initial

set mode.

D Quick set mode operation

q While power is ON, push [DISPLAY] for 1 sec.
• Quick set mode is selected and one of its items ap-
pears.
• Quick set mode items vary depending on the selected
operating mode (SSB, FM, etc.).
w Push [MENU] one or more times to select the de-
sired item.
• [M-CH] or [Y]/[Z] can also be used.
e Rotate the main dial to set the values or conditions
for the selected item.
r Repeat steps w and e to set other items.
t To exit quick set mode, push [DISPLAY] momen-
tarily.

D Initial set mode operation

q Push [POWER] for 1 sec. to turn power OFF.
w While pushing [LOCK], push [POWER] to turn
power ON.
• Initial set mode is selected and one of its items ap-
pears.
e Push [MENU] one or more times to select the de-
sired item.
• [M-CH] or [Y]/[Z] can also be used.
r Rotate the main dial to set the values or conditions
for the selected item.
t Repeat steps e and r to set other items.
y To exit initial set mode, push [POWER] for 1 sec.
to turn power OFF.
u Push [POWER] to turn power ON again.
• The conditions selected in initial set mode are now ef-
fective.
SET MODE
[POWER]
[M-CH] [MENU] [DISPLAY]
[DISPLAY EXAMPLE: QUICK SET MODE]
USB
S1
3 5 7 9 20 40 60dB
P 5
10
O
Item number
[POWER]
[M-CH] [MENU]
[DISPLAY EXAMPLE: INITIAL SET MODE]
Item number
12
Main dial
[Y]
[Z]
Value or
condition
Item
Main dial
[Y]
[Z]
[LOCK]
Value or
condition
Item
11
12
74