Ssb/Cw Frequency Shift Setting; Display Backlighting; Key/Switch Backlighting; Light Timer Setting - Icom IC-703 Instruction Manual

*
This item selects the displayed frequency shift func-
tion from ON and OFF.
When this function is activated, the receiving signal
can be kept in receive even when the operating mode
is changed between SSB and CW.
oN : The displayed frequency shifts when the oper-
ating mode is changed between SSB and CW.
oFF: The displayed frequency does not shift. (default)
The function display backlighting can be set to high,
low or OFF to suit ambient lighting.
The key/switch backlighting can be set to high, low or
OFF to suit ambient lighting.
*
The Light timer can be set to AUTO, ON or OFF to
suit lighting condition.
Auto: Automatically select "on" or "oFF" depends on
power supply voltage. (default)
on : Lights when some operation is performed, goes
out after 5 sec.
oFF : Lights continuously during transceiver power is
ON.
The LED brightness control for front panel can be set
to high or low.
*
The auto power OFF function can be used to auto-
matically turn the transceiver OFF after a specified
time of operation. This item can be set to 30 min., 60
min., 90 min., 120 min., or OFF.
When "

(SSB/CW frequency shift setting)

(Display backlighting)

(Key/switch backlighting)

(Light timer setting)

(LED brightness)

(Automatic power OFF)

" is set to ON, * marked items are undisplayed.
Synchronous tuning ON
The frequency shifting value may differ according
to the CW pitch setting.
Display backlighting set to
high (default).
Key/switch backlighting
set to high (default).
Default is Auto.
LED brightness set
to high.
Auto power OFF
deactivates. (default)
12
SET MODE
Synchronous tuning OFF
(default)
Display backlighting set to
low.
Key/switch backlighting
set to low.
LED brightness set
to low (default).
Auto power OFF set to
20 min.
12
78