D Setting Output Power; D Setting Microphone Gain - Icom IC-703 Instruction Manual

D Setting output power

q Push [DISPLAY] for 1 sec. to select quick set mode.
w Push [MENU] one or more times to select "
."
e Rotate the main dial to select the desired output.
• Output power is displayed in 11 steps (L, 1–9 and H)
but is continuously selectable.
r Push [DISPLAY] to exit quick set mode.
• Available power
Power supply SSB/CW
voltage RTTY/FM
13.8 V
0.1–10 W
(DC power mode)
9.6 V
0.1–5 W
(Battery mode)
*Carrier power

D Setting microphone gain

Microphone gain must be adjusted properly so that
your signal does not distort when transmitted.
q Select SSB or another phone mode (AM or FM
mode).
w Push [DISPLAY] for 1 sec. to select quick set mode.
e Push [MENU] one or more times to select "
."
• The ALC meter is selected automatically when operat-
ing in SSB mode.
r While speaking into the microphone adjust the mi-
crophone gain so that the ALC meter does not
peak past the ALC zone.
t Push [DISPLAY] to exit quick set mode.
QUICK SET MODE
AM*
0.1–4 W
0.1–2 W
QUICK SET MODE
BASIC OPERATION
[MENU] [DISPLAY]
USB
3 5 7 9
S1 20 40 60dB
P 5 10
O
[MENU] [DISPLAY]
USB
S1 3 5 7 9 20 40 60dB
ALC
ALC
ALC zone
3
Main dial
Maximum output
power is selected.
3
Main dial
Microphone gain
is set to 5.
26