Memory Operation; I Memory Channels; I Memory Channel Selection - Icom IC-703 Instruction Manual

I Memory channels

The transceiver has 105 memory channels (includes 6
scan edge channels). Memory mode is useful for
quickly changing to often-used frequencies.
All 105 memory channels are tuneable which means
the programmed frequency can be tuned temporarily
with the main dial, etc., in memory mode.
MEMORY
MEMORY
CHANNEL
CHANNEL
NUMBER
Regular
1–99
(split memory)
1A–3B
Scan edges
(3 pairs)

I Memory channel selection

q Select
functions.
• Push [DISPLAY] once or twice to select .
• Push [MENU] one or more times to select
w Push [
] to select memory mode.
(F-3)
e Rotate [M-CH] to select the desired memory chan-
nel.
• All memory channels including blank channels can be
selected.
• [UP]/[DN] on the microphone changes the frequency.
r To return to VFO mode, push [

MEMORY OPERATION

CAPABILITY
Independent transmit and receive
frequencies and one mode in each
memory channel.
In addition, tone frequencies can
also be stored for repeater use.
One frequency and one mode in
each memory channel as scan
edges for programmed scan.
.
] again.
(F-3)
NOTE: During split frequency operation, pro-
grammed memory contents can be called up to the
SUB readout (dot matrix portion of the display).
TRANSFER
TO VFO
Yes
Yes
[M-CH] [MENU]
[EXAMPLE]: Selecting memory channel 17.
CW
VFO A
CH
USB
CH
MEMO
USB
SPLIT
CH
MEMO
7
OVER-
CLEAR
WRITING
Yes Yes
Yes No
[F-3]
[DISPLAY]
F-3
M-CH SHIFT
6
7
56