D S1 Functions; D S2 Functions; D S3 Functions; D S4 Functions - Icom IC-703 Instruction Manual

D S1 functions

MENU F-1
MEMORY WRITE (p. 57)
Push for 1 sec. to store the selected
readout frequency and operating mode
F-1
into the displayed memory channel.
MEMO PAD WRITE (p. 60)
Push to store the the selected readout
frequency and operating mode into a
F-2
memo pad.
MEMO PAD READ (p. 60)
Push to call up a memo pad.
F-3

D S2 functions

DURING VFO MODE:
MENU F-1
DURING MEMORY MODE:
MENU F-1
SCAN (pgs. 61–63)
Push to start or stop the scan function.
F-1
PRIORITY WATCH (p. 63)
Push to start or stop the priority watch.
F-2
VFO/MEMORY
➥ Push momentarily to toggle between VFO
and memory modes. (p. 56)
F-3 ➥ Push for 1 sec. to transfer the frequency
and operating mode in the selected mem-
ory channel to a VFO. (p. 58)
SELECT SCAN (p. 61)
Push to toggle the select setting ON and
OFF for the selected memory channel.
F-2
F-2 F-3
F-2 F-3
F-2 F-3
PANEL DESCRIPTION

D S3 functions

MENU F-1
QUICK BAND CHANGE FUNCTION (p. 22)
This item provides access to the band stacking regis-
ter. By default the 7, 14 and 21 MHz bands are dis-
played. Push [F-1], [F-2] or [F-3] for 1 sec. to select a
new band if desired.
• A mode is memorized along with the frequency for each
band.

D S4 functions

(UT-106 is required for some version)

MENU F-1
AUTOMATIC NOTCH FILTER (p. 50)
This function automatically attenuates
beat tones, tuning signals, etc., even if
F-1
they are moving.
NOISE REDUCTION (p. 50)
This function reduces noise components
and picks out desired signals which are
F-2
buried in the noise.
NOISE REDUCTION LEVEL DISPLAY (p. 50)
This switch displays the noise reduction
level when pushed.
F-3
1
F-2 F-3
F-2 F-3
6
1