I Memory Names - Icom IC-703 Instruction Manual

7
MEMORY OPERATION

I Memory names

All memory channels (including scan edges) can be
tagged with alphanumeric names of up to 9 charac-
ters each.
All common keyboard characters (ASCII characters
33 to 126) can be used, including numerals and punc-
tuation marks.
• Calling up memory names
q Select the
display.
Push [DISPLAY] once or twice to select .
•
Push [MENU] one or more times to select
•
w Select a memory channel with [M-CH].
• Editing (programming) memory names
q Call up the desired memory (channel) name as
above.
w Push [
] to enter memory name edit mode.
(F-3)
• " " appears briefly, then a cursor blinking under
the first character position.
e Rotate the main dial to select the desired charac-
ter, then advance the cursor position.
• Pushing [ ] moves the cursor to the right; [
(F-3)
moves the cursor to the left.
• Pushing [ ] deletes the character.
(F-2)
r Repeat this procedure until all desired characters
have been selected.
t Push [
(MENU)
• The display re-appears and the programmed mem-
ory name is displayed.
59
] to exit memory name edit mode.
.
[M-CH] [MANU]
]
(F-1)
[F-1] [F-3]
Main dial
[F-2] [DISPLAY]
MENU
F-3
F-3
F-3