Function For Transmit; I Split Frequency Operation - Icom IC-703 Instruction Manual

6

FUNCTION FOR TRANSMIT

I Split frequency operation

Split frequency operation allows you to transmit and
receive on two different frequencies. Split frequency
operation uses 2 frequencies, one in VFO A and the
other in VFO B.
Following is an example of setting 7.057 MHz, CW
mode in VFO A (for receiving) and 7.025 MHz, CW
mode in VFO B (for transmitting).
q Select VFO A and set the frequency to 7.057
MHz/CW.
• [ ] is available when
(F-2)
• [ ] is available when
(F-3)
w Push or push and hold [
play.
➥ Push [
]: activates split only.
➥ Push and hold [
next page.
e To change the receive frequency, rotate the main
dial; to change the transmit frequency, rotate the
main dial while pushing [
• The transmit frequency can be monitored while push-
].
ing [
(F-3)
• Split operation is now set for receive on 7.057 MHz/CW
and transmit on 7.025 MHz/CW.
To exchange the transmit and receive frequencies,
push [ ] in
(F-2)
CONVENIENT
The display conveniently shows the transmit fre-
quency during split frequency operation and pushing
[ ] allows you to change the transmit frequency.
(F-3)
• Split lock function
The split lock function is convenient for changing only
the transmit frequency. Otherwise, accidentally re-
leasing the [
(F-3)
dial changes the receive frequency. The split lock's ef-
fectiveness can be selected in initial set mode (item
"
frequencies; or only the receive frequency. (p. 80)
51
appears.
appears.
] in the
(F-1)
]: activates the quick split
].
(F-3)
.
] switch while rotating the main
") for both receive and transmit
[MENU]
S1 3
P
O
dis-
S1 3
P
O
S1 3
P
O
[F-1] [F-3]
[F-2] [DISPLAY] Main dial
CW SPL
5 7 9 20 40 60dB VFO A
CH
5 10
CW SPL
5 7 9 20 40 60dB VFO A
CH
5 10
CW
SPL
5 7 9 20 40 60dB
VFO B
CH
5 10