D Fm Tone Set Mode - Icom IC-703 Instruction Manual

D FM tone set mode

While is selected in FM mode, push [
1 sec. to enter the FM tone set mode.
This item selects a subaudible tone for FM-T mode
operation to access a repeater. There are 50 tones
available from 67.0 Hz to 254.1 Hz (see table at
right).
This item sets a subaudible tone for tone squelch use.
The same subaudible tone frequencies as for re-
peater operation are available—see above
During repeater operation, you can detect the tone
frequency necessary to open a repeater. (see p. 45)
During tone squelch operation, you can detect the
tone frequency necessary to communicate using tone
squelch. (see p. 43)
] for
(F-2)
(Repeater tone scan)
(Tone squelch tone scan)
RECEIVE AND TRANSMIT
FM
The default is 88.5 Hz.
• Available subaudible tone frequencies
67.0 085.4 107.2 136.5
69.3 088.5 110.9 141.3
71.9 091.5 114.8 146.2
74.4 094.8 118.8 151.4
77.0 097.4 123.0 156.7
79.7 100.0 127.3 159.8
82.5 103.5 131.8 162.2
FM
The default is 88.5 Hz.
FM-T
The default is 88.5 Hz.
FM-TSQL
The default is 88.5 Hz.
4
(Unit: Hz)
165.5 186.2 210.7 254.1
167.9 189.9 218.1
171.3 192.8 225.7
173.8 196.6 229.1
177.3 199.5 233.6
179.9 203.5 241.8
183.5 206.5 250.3
4
44