D Contest Number Set Mode - Icom IC-703 Instruction Manual

D D Contest number set mode
This menu is used to set the contest (serial) number
and count up trigger, etc.
• Setting contents
q Select CW mode with [MODE].
w Enter the memory keyer menu.
[MODE] f
• Push or 1 sec. to enter the memory keyer
send menu.
[DISPLAY]
• Push momentarily to enter the memory
keyer menu.
e Push [
] to enter the contest number set
(F-2)
mode.
r Push [MENU] once or twice to select the desired set
item.
• [M-CH] or [Y]/[Z] can also be used.
t Set the desired condition using the main dial.
y Push [DISPLAY] twice to return to the memory
keyer send menu.
(Number style)
This item sets the numbering system used for contest
(serial) numbers— normal or morse cut numbers.
n : Does not use morse cut number (default)
190.Ano : Sets 1 as A, 9 as N and 0 as O.
190.Ant : Sets 1 as A, 9 as N and 0 as T.
90.no : Sets 9 as N and 0 as O.
90.nt : Sets 9 as N and 0 as T.
This selects which of the three memory slots will have
the contest serial number exchange. The count up
trigger allows the serial number automatically incre-
mented after each complete serial number exchange
is sent.
• 1 (MK1), 2 (MK2) and 3 (MK3) can be set. (default: 2)
This item shows the current number for the count up
trigger channel set above.
• Rotate the tuning dial to change the number.
(Count up trigger)
(Present number)
RECEIVE AND TRANSMIT
[MODE] Main dial
[M-CH] [MENU] [F-2] [DISPLAY]
CW
CW
CW
4
[Y]
[Z]
4
36