DES-3026:4#show snmp user
Command: show snmp user
Username
--------------- ---------------
initial
Total Entries: 1
DES-3026:4#
create snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an SNMP view:
DES-3026:4#create snmp view dlinkview 1.3.6 view_type included
Command: create snmp view dlinkview 1.3.6 view_type included
Success.
DES-3026:4#
delete snmp view
Purpose
Syntax
Description
Parameters
DES-30XX Layer 2 Switch CLI Reference Manual
Group Name SNMP Version Auth-Protocol PrivProtocol
------------
initial
V3
Used to assign views to community strings to limit which MIB objects
and SNMP manager can access.
create snmp view <view_name 32> <oid> view_type [included |
excluded]
The create snmp view command assigns views to community strings
to limit which MIB objects an SNMP manager can access.
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be created.
<oid> − The object ID that identifies an object tree (MIB tree) that will
be included or excluded from access by an SNMP manager.
included − Include this object in the list of objects that an SNMP
manager can access.
excluded − Exclude this object from the list of objects that an SNMP
manager can access.
Only administrator-level users can issue this command.
Used to remove an SNMP view entry previously created on the
Switch.
delete snmp view <view_name 32> [all | <oid>]
The delete snmp view command is used to remove an SNMP view
previously created on the Switch.
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view to be deleted.
-------------
------------
None
None
29