Enable 802.1X; Disable 802.1X; To Enable 802.1X Switch Wide; To Disable 802.1X On The Switch - D-Link DES-3010F Command Line Interface Reference Manual
Managed 8/16/24-port 10/100mbps n-way fast ethernet switch
Hide thumbs
Also See for DES-3010F:
- Command line interface manual (231 pages) ,
- Manual (225 pages) ,
- User manual (225 pages)
Table of Contents
Advertisement
Each command is listed, in detail, in the following sections.
enable 802.1x
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable 802.1x switch wide:
DES-3026:4#enable 802.1x
Command: enable 802.1x
Success.
DES-3026:4#
disable 802.1x
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable 802.1x on the Switch:
DES-3026:4#disable 802.1x
Command: disable 802.1x
Success.
DES-3026:4#
DES-30XX Layer 2 Switch CLI Reference Manual
NOTE: The uplink module ports (DES-3010F/G ports 9-10, DES-3018 ports
17-18, DES-3026 ports 25-26) do not support the 802.1X function.
Used to enable the 802.1x server on the Switch.
enable 802.1x
The enable 802.1x command enables the 802.1x Port-based or MAC-
based Network Access control server application on the Switch.
None.
Only administrator-level users can issue this command.
Used to disable the 802.1x server on the Switch.
disable 802.1x
The disable 802.1x command is used to disable the 802.1x Port-based or
MAC-based Network Access control server application on the Switch.
None.
Only administrator-level users can issue this command.
128
Advertisement
Table of Contents
