Show Snmp Community - D-Link DES-3010F Command Line Interface Reference Manual

delete snmp community
Parameters
Restrictions
Example usage:
To delete the SNMP community string "dlink:"

show snmp community

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently entered SNMP community strings:
DES-3026:4#show snmp community
Command: show snmp community
SNMP Community Table
Community Name
-------------------------------- --------------------------
dlink
private
public
Total Entries: 3
DES-3026:4#
DES-30XX Layer 2 Switch CLI Reference Manual
previously defined SNMP community string from the Switch.
<community_string 32> − An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community
to delete. This string is used like a password to give remote SNMP
managers access to MIB objects in the Switch's SNMP agent.
Only administrator-level users can issue this command.
DES-3026:4#delete snmp community dlink
Command: delete snmp community dlink
Success.
DES-3026:4#
Used to display SNMP community strings configured on the Switch.
show snmp community {<community_string 33>}
The show snmp community command is used to display SNMP
community strings that are configured on the Switch.
<community_string 32> − An alphanumeric string of up to 33
characters that is used to identify members of an SNMP
community. This string is used like a password to give remote
SNMP managers access to MIB objects in the Switch's SNMP
agent.
None.
View Name
ReadView
CommunityView
CommunityView
32
Access Right
------------
read_write
read_write
read_only