Create Snmp View - D-Link DES-1210-28/ME Reference Manual

Syntax
Description
Parameters
Restrictions
Example usage:
To display the SNMP users currently configured on the Switch:
DES-1210-28/ME:5# show snmp user
Command: show snmp user
Username
--------
ReadOnly
ReadOnly
ReadWrite ReadWrite
ReadWrite ReadWrite
Total Entries: 4
DES-1210-28/ME:5#

create snmp view

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an SNMP view:
DES-1210-28/ME:5# create snmp view dlink 1.3.6 1.1.1 view_type excluded
Command: create snmp view dlink 1.3.6 1.1.1 view_type excluded
DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
show snmp user
The show snmp user command displays information about each
SNMP username in the SNMP group username table.
None.
None.
Group Name
------------ ------------
ReadOnly
ReadOnly
To assign views to community strings to limit which MIB objects an
SNMP manager can access.
create snmp view <view_name 32> <oid 32> <oid_mask 32
view_type [included | excluded]
The create snmp view command assigns views to community
strings to limit which MIB objects an SNMP manager can access.
<view_name 32> − A string of up to 30 alphanumeric characters that
identifies the SNMP view to be created.
<oid 32> − The object ID that identifies an object tree (MIB tree) to
be included or excluded from access by an SNMP manager.
<oid_mask 32> − The object ID mask that identifies an object tree
(MIB tree) to be included or excluded from access by an SNMP
manager.
included − Includes this object in the list of objects that an SNMP
manager can access.
excluded − Excludes this object from the list of objects that an
SNMP manager can access.
Only administrator or operate-level users can issue this command.
SNMP Version Auth-Protocol
---------------- ----------------
V1 None
V2 None
V1 None
V2 None
55
PrivProtocol
None
None
None
None