Disable Sim; Show Sim - D-Link DES-3010F Command Line Interface Reference Manual

DES-3026:4#enable sim
Command: enable sim
Success.
DES-3026:4#

disable sim

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable SIM on the Switch:

show sim

Purpose
Syntax
Description
DES-30XX Layer 2 Switch CLI Reference Manual
Used to disable Single IP Management (SIM) on the Switch.
disable sim
This command will disable SIM globally on the Switch.
None.
Only administrator-level users can issue this command.
DES-3026:4#disable sim
Command: disable sim
Success.
DES-3026:4#
Used to view the current information regarding the SIM group on
the Switch.
show sim {[candidates {<candidate_id 1-100>} | members
{<member_id 1-32>} | group {commander_mac <macaddr>}
neighbor]}
This command will display the current information regarding the
SIM group on the Switch, including the following:
SIM Version - Displays the current Single IP Management version
on the Switch.
Firmware Version - Displays the current Firmware version on the
Switch.
Device Name - Displays the user-defined device name on the
Switch.
MAC Address - Displays the MAC Address of the Switch.
Capabilities – Displays the type of switch, be it Layer 2 (L2) or
Layer 3 (L3).
Platform – Switch Description including name and model number.
SIM State –Displays the current Single IP Management State of the
Switch, whether it be enabled or disabled.
Role State – Displays the current role the Switch is taking, including
Commander, Member or Candidate. A stand-alone switch will
157