D-Link DES-3010F Command Line Interface Reference Manual page 41

DES-30XX Layer 2 Switch CLI Reference Manual
Security Level
Group Name
ReadView Name
WriteView Name
Notify View Name : CommunityView
Security Model
Security Level
Group Name
ReadView Name
WriteView Name
Notify View Name : CommunityView
Security Model
Security Level
Group Name
ReadView Name
WriteView Name
Notify View Name : CommunityView
Security Model
Security Level
Total Entries: 10
DES-3026:4#
create snmp host
Purpose Used to create a recipient of SNMP traps generated by the Switch's
SNMP agent.
Syntax create snmp host <ipaddr> [v1 | v2c | v3 [noauth_nopriv |
auth_nopriv | auth_priv] <auth_string 32>]
Description The create snmp host command creates a recipient of SNMP traps
generated by the Switch's SNMP agent.
<ipaddr> − The IP address of the remote management station that
Parameters
will serve as the SNMP host for the Switch.
v1 – Specifies that SNMP version 1 will be used. The Simple
Network Management Protocol (SNMP), version 1, is a network
management protocol that provides a means to monitor and control
network devices.
v2c – Specifies that SNMP version 2c will be used. The SNMP v2c
supports both centralized and distributed network management
strategies. It includes improvements in the Structure of Management
Information (SMI) and adds some security features.
v3 – Specifies that the SNMP version 3 will be used. SNMP v3
provides secure access to devices through a combination of
authentication and encrypting packets over the network. SNMP v3
adds:
: NoAuthNoPriv
: ReadGroup
: CommunityView
:
: SNMPv2
: NoAuthNoPriv
: WriteGroup
: CommunityView
: CommunityView
: SNMPv1
: NoAuthNoPriv
: WriteGroup
: CommunityView
: CommunityView
: SNMPv2
: NoAuthNoPriv
Message integrity − ensures that packets have not been
tampered with during transit.
Authentication − determines if an SNMP message is from a
valid source.
37