Show 802.1X Auth_Configuration - D-Link DES-3010F Command Line Interface Reference Manual

DES-3026:4#show 802.1x auth_state ports 1-5
Command: show 802.1x auth_state ports 1-5
Port
------
1
2
3
4
5
CTRL+C ESC q
Example usage:
To display the 802.1x authentication states (stacking disabled) for MAC-based 802.1x:
DES-3026:4#show 802.1x auth_state
Command: show 802.1x auth_state
Port number : 1
Index MAC Address
------ -------------------
1 00-08-02-4E-DA-FA
2
3
4
5
6
7
8
CTRL+C ESC q

show 802.1x auth_configuration

Purpose
Syntax
Description
DES-30XX Layer 2 Switch CLI Reference Manual
Auth PAE State Backend State Port Status
-------------- -------------
ForceAuth Success
ForceAuth Success
ForceAuth Success
ForceAuth Success
ForceAuth Success
Quit SPACE n
Auth PAE State
-----------------------
Authenticated
Quit SPACE n Next Page
Used to display the current configuration of the 802.1x server on the Switch.
show 802.1x auth_configuration {ports <portlist>}
The show 802.1x command is used to display the current configuration of
the 802.1x Port-based Network Access Control server application on the
Switch.
The following details what is displayed:
802.1x Enabled/Disabled − Shows the current status of 802.1x functions on
the Switch.
Authentication Protocol: Radius_Eap − Shows the authentication protocol
suite in use between the Switch and a RADIUS server.
Port number − Shows the physical port number on the Switch.
Capability: Authenticator/None − Shows the capability of 802.1x functions
on the port number displayed above. There are four 802.1x capabilities that
can be set on the Switch: Authenticator, Supplicant, Authenticator and
Supplicant, and None.
Port Status: Authorized/Unauthorized − Shows the result of the
authentication process. Authorized means that the user was authenticated,
------------
Authorized
Authorized
Authorized
Authorized
Authorized
Next Page Enter Next Entry
Backend State
---------------------
Idle
Enter Next Entry a All
130
a All
Port Status
-----------------
Authorized