Create 802.1X User; Show 802.1X User; To Display Radius Settings On The Switch; To Create An 802.1X User - D-Link DES-3010F Command Line Interface Reference Manual

show radius
Parameters
Restrictions
Example usage:

To display RADIUS settings on the Switch:

DES-3026:4#show radius
Command: show radius
Index IP Address
-----
1
2
3
Total Entries : 3
DES-3026:4#

create 802.1x user

Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:

To create an 802.1x user:

DES-3026:4#create 802.1x user dtremblett
Command: create 802.1x user dtremblett
Enter a case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DES-3026:4#

show 802.1x user

Purpose
Syntax
Description
DES-30XX Layer 2 Switch CLI Reference Manual
None.
None.
Auth-Port
Number
------------------ ---------
10.1.1.1 1812
20.1.1.1 1800
30.1.1.1 1812
Used to create a new 802.1x user.
create 802.1x user <username 15>
The create 802.1x user command is used to create new 802.1x
users.
<username 15> − A username of up to 15 alphanumeric characters
in length.
Only administrator-level users can issue this command.
Used to display the 802.1x user accounts on the Switch.
show 802.1x user
The show 802.1x user command is used to display the 802.1x
Port-based or MAC-based Network Access control local users
Acct-Port Status
Number
--------- -----------
1813 Active
1813 Active
1813 Active
138
Key
------------
switch
des3226
dlink