Enable Clipaging; Disable Clipaging; Enable Telnet - D-Link DES-3010F Command Line Interface Reference Manual

enable clipaging

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable pausing of the screen display when the show command output reaches the end of the page:
DES-3026:4#enable clipaging
Command: enable clipaging
Success.
DES-3026:4#

disable clipaging

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable pausing of the screen display when show command output reaches the end of the page:
DES-3026:4#disable clipaging
Command: disable clipaging
Success.
DES-3026:4#

enable telnet

Purpose
Syntax
DES-30XX Layer 2 Switch CLI Reference Manual
Used to pause the scrolling of the console screen when the show
command displays more than one page.
enable clipaging
This command is used when issuing a command which causes the
console screen to rapidly scroll through several pages. This
command will cause the console to pause at the end of each page.
The default setting is enabled.
None.
Only administrator-level users can issue this command.
Used to disable the pausing of the console screen scrolling at the
end of each page when the command displays more than one
screen of information.
disable clipaging
This command is used to disable the pausing of the console screen
at the end of each page when the command would display more
than one screen of information.
None.
Only administrator-level users can issue this command.
Used to enable communication with and management of the Switch
using the Telnet protocol.
enable telnet {<tcp_port_number 1-65535>}
16