Show Snmp Traps - D-Link DES-3010F Command Line Interface Reference Manual

disable snmp authenticate trap
Syntax
Description
Parameters
Restrictions
Example Usage:
To disable the SNMP authentication trap support:

show snmp traps

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current SNMP trap support:
DES-3026:4#show snmp traps
Command: show snmp traps
SNMP Traps
Authenticate Trap
DES-3026:4#
DES-30XX Layer 2 Switch CLI Reference Manual
disable snmp authenticate trap
This command is used to disable SNMP authentication support on
the Switch.
None.
Only administrator-level users can issue this command.
DES-3026:4#disable snmp authenticate trap
Command: disable snmp authenticate trap
Success.
DES-3026:4#
Used to show SNMP trap support on the Switch .
show snmp traps
This command is used to view the SNMP trap support status
currently configured on the Switch.
None.
Only administrator-level users can issue this command.
: Enabled
: Enabled
44