Config Snmp Engineid; Show Snmp Engineid - D-Link DES-3010F Command Line Interface Reference Manual

config snmp engineID

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To give the SNMP agent on the Switch the name "0035636666"

show snmp engineID

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current name of the SNMP engine on the Switch:
create snmp group
Purpose
Syntax
Description
DES-30XX Layer 2 Switch CLI Reference Manual
Used to configure a name for the SNMP engine on the Switch.
config snmp engineID <snmp_engineID 10-64>
The config snmp engineID command configures a name for the
SNMP engine on the Switch.
<snmp_engineID 10-64> − An alphanumeric string between 10 and
64 characters that will be used to identify the SNMP engine on the
Switch.
Only administrator-level users can issue this command.
DES-3026:4#config snmp engineID 0035636666
Command: config snmp engineID 0035636666
Success.
DES-3026:4#
Used to display the identification of the SNMP engine on the Switch.
show snmp engineID
The show snmp engineID command displays the identification of
the SNMP engine on the Switch.
None.
None.
DES-3026:4#show snmp engineID
Command: show snmp engineID
SNMP Engine ID : 0035636666
DES-3026:4#
Used to create a new SNMP group, or a table that maps SNMP
users to SNMP views.
create snmp group <groupname 32> [v1 | v2c | v3
[noauth_nopriv | auth_nopriv | auth_priv]] {read_view
<view_name 32> | write_view <view_name 32> | notify_view
<view_name 32>}
The create snmp group command creates a new SNMP group, or a
t bl th t SNMP t SNMP i
33