D-Link DES-3010F Command Line Interface Reference Manual page 75

enable stp
Restrictions
Example usage:
To enable STP, globally, on the Switch:
disable stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable STP on the Switch:
DES-3026:4#disable stp
Command: disable stp
Success.
DES-3026:4#
show stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the status of STP on the Switch:
Status 1: STP enabled with STP compatible version
DES-30XX Layer 2 Switch CLI Reference Manual
Only administrator-level users can issue this command.
DES-3026:4#enable stp
Command: enable stp
Success.
DES-3026:4#
Used to globally disable STP on the Switch.
disable stp
This command allows the Spanning Tree Protocol to be globally
disabled on the Switch.
None.
Only administrator-level users can issue this command.
Used to display the Switch's current STP configuration.
show stp
This command displays the Switch's current STP configuration.
None.
None.
71