Clear Counters; Clear Log; Show Log; To Clear The Log Information - D-Link DES-3010F Command Line Interface Reference Manual

clear counters

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear the counters:
DES-3026:4#clear counters
Command: clear counters
Success.
DES-3026:4#

clear log

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To clear the log information:

DES-3026:4#clear log
Command: clear log
Success.
DES-3026:4#

show log

Purpose
Syntax
Description
Parameters
Restrictions
DES-30XX Layer 2 Switch CLI Reference Manual
Used to clear the Switch's statistics counters.
clear counters [ports <portlist>]
This command will clear the counters used by the Switch to compile
statistics.
<portlist> − Specifies a port or range of ports to be cleared for
statistics.
Only administrator-level users can issue this command.
Used to clear the Switch's history log.
clear log
This command will clear the Switch's history log.
None.
Only administrator-level users can issue this command.
Used to display the Switch history log.
show log {index <value_list X-Y>}
This command will display the contents of the Switch's history log.
index <value_list X-Y> − Enter a value that corresponds to an entry
made in the log. Multiple entries may be made in the form of x-y, or
from a lower number entry to the higher number entry in the log. The
smallest number (and therefore the earlier entry) will be first.
None.
60