Operating Band Selection; Operating Frequency Selection; Tuning Speed Selection; Vfo А And Vfo В Selection - Icom IC -765 Instruction Manual

5-2 OPERATING BAND SELECTION
Digit keys
[DOWN] /[ ОР]
5-3 OPERATING FREQUENCY SELECTION
switch before
Push the [FUNC]
entering digits.
[EXAMPLES]
eSet frequency at 7.00000 MHz.
Push [7] then [ENT].
eSet frequency at 7.10000 MHz.
Push [7] [.] [1] then [ENT].
eSet frequency at 28.12345 MHz.
Push [2] [8] [.] [1] [2] [3] [4] [5] then [ENT].
eSet frequency at 234 kHz (0.23400 MHz).
Push [0] [.] [2] [3] [4] then [ENT].
5-4 TUNING SPEED SELECTION
[TS]
5-5 VFO A AND VFO B SELECTION
{VFO А/В]
PRE-OPERATION 5
The ІС-765 covers all HF amateur bands from 1.9 MHz ~
28 MHz for transmitting and has receive capability from
100 kHz ~ 30 MHz. Тһе ІС-765 has a convenient band
stacking register function. (See p. 19)
1) Push the digit key with an amateur band printed on the
key to select the desired amateur band.
2) Push either the [DOWN] or [UP] switch to change the
displayed frequency in 1 MHz steps.
3) Rotate the main dial to select the desired frequency.
e See Section 5 - 4 for the tuning speed selection.
1) Push the [FUNC] switch.
e The red indicator lights up.
2) Enter the desired frequency.
ePush the [.] key after entering MHz and before
entering kHz.
3) Push the [ENT] key to enter the frequency.
4) To enter 0 in succession, push the [ENT] key once.
5) Rotate the main dial to select the desired frequency.
e See Section 5 - 4 for the tuning speed selection.
Normal rotation of the main dial changes the frequency
increment for 5 kHz per full rotation in 10 Hz steps. Faster
main dial rotation automatically shifts the tuning increment
for 10 kHz per full rotation in 10 Hz steps.
1) When the [TS] switch is pushed IN, frequency incre-
ments shift in 1 kHz steps while in any operating mode.
2) To change the frequency increment from 5 kHz to
2.5 kHz per full rotation, See Section 11 - 4 on p. 46.
The 1C-765 contains two VFOs which both receive and
transmit. The VFOs are called VFO A and VFO B. This
dual VFO system provides tremendous operating flexibility.
Pushing the [VFO A/B] switch each time alternately selects
VFOA or VFO B.