Memory Transferring; Memory Clearing - Icom IC -765 Instruction Manual

8-5 MEMORY TRANSFERRING
(1) IN VFO MODE
[VFO/MEMO] [M>VFO]
[MEMORY-CH]
(2) IN MEMORY MODE
8-6 MEMORY CLEARING
[FUNC] [WRITE]
[VFO/MEMO] >
[MEMORY-CH]
[EXAMPLE]
Clear contents of memory channel 20.
- Contents of memory channel 20: 14.0300 MHz/CW
1) Select MEMORY mode.
2) Select memory channel 20.
MEMORY CHANNEL OPERATION 8
The selected memory contents іп a memory channel сап Бе
transferred to a VFO. Follow the steps below (1) for
memory transferring in VFO mode or (2) for memory
transferring in MEMORY mode.
The frequency and mode stored in the displayed memory
channel are transferred to a selected VFO.
1) Rotate the [MEMORY-CH] selector to select the desired
memory channel you want to read when operating in
VFO mode.
2) Push and hold the [M®VFO] switch until the speaker
emits 3 beep tones.
e The information is transferred to a VFO.
The displayed frequency and mode are transferred to the
VFO used immediately prior to changing to MEMORY
mode.
1) Rotate the [MEMORY-CH] selector to select the desired
memory channel you want to read when operating in
MEMORY mode.
2) Push and hold the [M»VFO] switch until the speaker
emits 3 beep tones.
e The information is transferred to a VFO.
3) Push the [VFO/MEMO] switch to select VFO mode.
ө The transferred memory contents are displayed..
This function clears the information in each memory
channel.
1) Push the [VFO/MEMO] switch to select MEMORY
mode.
2) Rotate the [MEMORY-CH] selector to select a memory
channel to be cleared.
3) Push the [FUNC] switch.
4) Push and hold the [WRITE] switch until the speaker
emits 3 beep tones.
e The memory channel is now cleared.
3) Push the [FUNC] switch.
4) Push and hold the [WRITE] switch.