Configuring SNMP
Configuring SNMP
The NetDefend firewall users can monitor the NetDefend firewall, using tools that
support SNMP (Simple Network Management Protocol). You can enable users can
do so via the Internet, by configuring remote SNMP access.
The NetDefend firewall supports the following SNMP MIBs:
• SNMPv2-MIB
• RFC1213-MIB
• IF-MIB
• IP-MIB
All SNMP access is read-only.
To configure SNMP
1. Click Setup in the main menu, and click the Management tab.
The Management page appears.
2. Specify from where SNMP access should be granted.
See Access Options on page 391 for information.
If you selected IP Address Range, additional fields appear.
394
D-Link NetDefend firewall User Guide