Predefined Qos Classes - D-Link NetDefend DFL-CP310 User Manual

Predefined QoS Classes

For example, if Traffic Shaper is enabled for outgoing traffic, and you create an
Allow rule associating all outgoing VPN traffic with the Urgent QoS class, then
Traffic Shaper will handl
policy fo r the
See Adding and Editing Rules on page 213.
Note: Tr
affic Shaper must be enabled for the direction of traffic specified in the rul
Note: If you do not assign a connection type to a class, Traffic Shaper automatically
assigns the connection type to the predefined "Default" class.
Predefined QoS Classes
Traffic Shaper provides the following predefined QoS classes.
To assign traffic to thes
on page 209.
Table 21: Predefined
Class Weig ht
Default 10
Urgent 15
154
e outgoing VPN traffic as specified in the bandwidth
Urgent class.
e classes, define firewall rules as described in
QoS Classes
Delay Sensitivity
Medium
(Normal Traffic)
High
(Interactive Traffic)
Useful for
Normal traffic.
All traffic is assigned to this class b
Traffic that is highly se
example, IP telephony, videoconferenc
and interactive protocols that require q
user response, such as telnet.
D-Link NetDefend firewall User Guide
e.
Using Rules
y default.
nsitive to delay. For
ing,
uick