Configuring High Availability On A Gateway - D-Link NetDefend DFL-CP310 User Manual

Security vpn firewall netdefend secured by check point

Hide thumbs Also See for NetDefend DFL-CP310:

Table of Contents

Configuring High Availability

Configuring High Availability on a Gateway

The following procedure explains how to configure HA on a single gateway. You

must perform this procedure on each NetDefend firewall that you want to include

in the HA cluster.

To configure HA on a NetDefend firewall

1. Set the appliance's internal IP addresses and network range.

Each appliance must have a different internal IP address.

See Changing IP Addresses on page 105.

2. Click Setup in the main menu, and click the High Availability tab.

The High Availability page appears.

3. Select the Gateway High Availability check box.

D-Link NetDefend firewall User Guide

Table of Contents