Logging On To A Remote Access Vpn Site; Logging On To A Remote Access Vpn S Ite - D-Link NetDefend DFL-CP310 User Manual

3. To disable a VPN site, do the following:
Note: Disab
a. Cli ck the
A confirmat
b. Click OK.
The icon changes to

Logging on to a Remote Access VPN Site

Yo u need to manually log on to Remote Access VPN Ser
M anual Login. You do not need to manually log o
Se rver configured for Automatic Login or a Site-t
co mputers on your network have constant access to it.
M anual Login can be done through either the NetDefend Portal
page. When you log on and traffic is sent to the VPN site, a VPN tunnel is
established. Only the computer from which you logged on can use the tunnel. To
sh are the tunnel with other comput
the VPN site from those computers, using the same user name and password.
Note: You must use a single user name and password for each VPN destination
gateway.
Chapter 12: Working With VPNs
ling a VPN site eliminates the tunne
icon in the desired VPN site's row.
ion message appears.
, and the VPN site is disabled.
ers
Logging on to a Remote Access VPN Site
l and erases the network topology.
n to a Remote Access VPN
o-Site VPN Gateway: all the
in your home network, you must log on to
vers configured for
or the my.vpn
341