Enabling/Disabling Rules - D-Link NetDefend DFL-CP310 User Manual

Using Rules
In this field... Do this...
Redir ect to port Select this option to r
You must then type the desired port in the field provided.
This option is called Port Address Translation (PAT), and is only available
when defining an Allow and Forward rule.

Enabling/Disabling Rules

You can temporarily disable a user-defined rule.
To enable/disable a rule
1. Click Security in the main menu, and click the Rules tab.
The Rules page appears.
2. Next to the desired rule, do one of the following:
• To enable the rule, click
The button changes to
• To disable the rule, click
The button changes to
218
edirect the connections to a specific port.
.
and the rule is enabled.
.
and the rule is disabled.
D-Link NetDefend firewall User Guide