D-Link NetDefend DFL-CP310 User Manual page 61

Note: Your browser must support 128-bit cipher strength. To check your browser's
cipher strength, open Internet Explorer and click Help > About Internet Explorer.
To ac cess the NetDefend Portal from your internal network
• Browse to
https://my.firewall.
(Note that the URL starts with "https", not "http".)
The NetD efend Portal appears.
To access the NetDe
• Browse to ht
tps://<firewall
(Note that h t e URL starts with "https", not "http".)
The follow n i g things happen in the order below:
If this is your first attempt to access the NetDefend Portal through HTTPS, the
certificate in the NetDefend firewall is not yet known to the browser, so the
Security Alert dialog box appears.
To avoid seeing this dialog box again, install the certificate of the destination
NetDefend firewall. If you are using Internet Explorer 5, do the following:
a. Click View Certificate.
The Certificate dialog box appears, with the General tab displayed.
b. Click Install Certificate.
The Certificate Import Wizard opens.
c. Click Next.
d. Click Next.
e. Click Finish.
f. Click Yes.
g. Click OK.
Chapter 3: Getting Started
fend Po rtal from the Internet
_IP_address>:981.
Accessing the TNetDefendT Portal Remotely Using HTTPS
45