Network Requirements - D-Link NetDefend DFL-CP310 User Manual

The DFL-CPG310 also includes:
• Two antennas
• Wall mounting kit, including two plastic conical anchors and two cross-
head screws
• USB extension cable

Network Requirements

• A broadband Internet connection via cable or DSL modem with Ethernet
interface (RJ-45)
• 10BaseT or 100BaseT Network Interface Card installed on each computer
• TCP/IP network protocol installed on each computer
• Internet Explorer 5.0 or higher, or Netscape Navigator 4.7 and higher
• CAT 5 STP (Category 5 Shielded Twisted Pair) Straight Through Ethernet
cable for each attached device
Note: The NetDefend firewall automatically detects cable types, so you can use
either a straight-through or crossed cable, when cascading an additional hub or
switch to the NetDefend firewall.
Note: For optimal results, it is highly recommended to use either Microsoft Internet
Explorer 5.5 or higher, or Mozilla Firefox 1.0 or higher.
• When using the DFL-CPG310, an 802.11b, 802.11g or 802.11 Super G
wireless card installed on each wireless station
Chapter 1: Introduction
NetDefend Features and Compatibility
7