Table of Contents
Advertisement
Configuring Network Settings
The Automatic DHCP range check box is disabled, and the Relay to IP field
appears.
4. In the Relay to IP field, type the IP address of the desired DHCP server.
Click Apply.
5.
A warning message appears.
Click OK.
6.
A success message appears
7.
If your com
puter is configured to obtain its IP address automatically (using
DHCP
), and either the NetDefend DHCP server or ano
enabled, restart your computer.
Your computer obtains an IP address in the DHCP address range.
100
ther DHCP server is
D-Link NetDefend firewall User Guide
Advertisement
Chapters
Table of Contents
Troubleshooting
