Note: You can use HTTPS to access the NetDefend Portal from your internal
network, by surfing to https://my.firewall.
If you selected IP Address Range, additional fields appear.
3. If you selected IP Address Range, enter the desired IP address range in the fields
provided.
4. Click Apply.
The HTTPS configuration is saved. If you configured remote HTTPS, you can
now access the NetDefend Portal through the Internet, using the procedure
Accessing the NetDefend Portal Remotely on page 44.
Table 80: Access Options
S
elect this
o
ption...
Internal Network
Chapter 14: Maintenance
To allow access from...
The internal network only.
This disables remote access capability.
Configuring HTTPS
391