Changing Ip Addresses - D-Link NetDefend DFL-CP310 User Manual

In this field...
T FTP Server
TFTP Boot File

Changing IP Addresses

If desired, you can change your NetDefend firewall's internal IP address, or the
entire range of IP addresses in your internal network. You may want to perform
t hese tas ks if, for example, you are adding the NetDefend firewall to a larg
existing network and don'
you are using a DHCP server other than the NetDefend firewall, that assigns
addresse s within a different range.
To chang I e P addresses
Network in the main menu, and click the My Network tab.
1. Click
The M y Network page appears.
2. In the LAN network's row, click Edit.
The Edit Network Settings page appears.
3. To change the NetDefend firewall's internal IP address, enter the new IP address
in the IP Address field.
4. To change the internal network range, enter a new value in the Subnet Mask
field.
Chapter 5: Managing Your Network
Do this...
Trivial File Transfer Protocol (TFTP) enables
computers over the network.
To assign a TFTP server to the DHCP clients, type the IP address of
the TFTP server.
Type the boot file to use for booting DHCP clients via TFTP
t want to change that network's IP address range, or if
Configuring Network Settings
booting diskless
.
e
105