D-Link NetDefend DFL-CP310 User Manual page 337

In this field... Do this...
Route Based VPN Cl
th
R
re
This improves network and VPN management efficiency for large
ne
For constantly changing net
VPN combined with OSPF dynamic routing. This enables you to make
fre
network, without having to reconfigure static routes.
OSPF is enabled using CLI. For information on using CLI, see Controlling
th
th
Guide
Th
gatew
Destination network Type
yo
Subnet mask Select the subnet masks fo
No
site's s
Backup G ateway Ty
Chapter 12: Working With VPNs
ick this option to create a virtual tunnel interface (VTI) for this site, so
at it can participate in a route-based VPN.
oute-based VPNs allow routing connections over VPN tunnels, so that
mote VPN sites can participate in
tworks.
quent chang es to the network topology, such as adding an internal
e Appliance via the Command Line on page 386. For information on
e r levant commands for OSPF, refer to the NetDefend CLI Re e
.
is option is only available for when configuring a Site-to-Site VP
ay.
up to three destination network addresses at the VPN site
u want to connect.
te: Obtain
the destination networks and subnet masks from the VPN
ystem administrator.
pe the name of the VPN
dynamic or static routing schemes.
works, it is recommended to use a route-based
r the destination network addresses.
site to use if the primary VPN site fails.
Adding and Editing VPN Sites
ference
N
to which
321