D-Link NetDefend DFL-CP310 User Manual page 189

In this field... Do this...
MAC Address Specify w
Filteri ng of the follo
•
•
Note: MAC address filtering does not provide strong security, since MAC
addresses can be spo fed by a determined attacker. Therefore, it is not
recomme
Wireless Transmitter
Transmission Rate Select the transmission rate:
•
•
Transmitter Power Select the transmitter power.
Setting a higher transmitter power increases the access point's range. A
lower power reduces interference with other access points in the vicinity.
The default value is Full. It is not necessary to change this value, unless
there are other access points in the vicinity.
Chapter 7: Configuring a Wireless Network
hether you want to enable MAC address filtering, by selecting one
wing:
Yes. Enable MAC address filtering.
Only MAC ad dresses that you added as network objects can
connect to your network.
For information on network objects, see Using Network
Objects on page 129.
No. Disable MAC address filtering. This is the default.
o
nded to rely n this setting alone for security. o
Automatic. The NetDefend firewall automatically selects a rate.
This is the default.
A specific rate
Manually Configuring a WLAN
173