D-Link NetDefend DFL-CP310 User Manual page 191

In this field... Do this...
RTS Threshold T
(Request To Send) before sending the IP packet.
If
of each other, they might send data to the access point simultaneously,
th
is
If
se he
Setting a value equal to the fragm
RTS.
The default value is 2346.
E xtended Range Specify whether to use Extended Range (XR) mode:
M ode (XR)
•
•
For more information on XR mode, see About the Wireless Hardware in
Your NetDefend firewall on page 162.
Multimedia QoS Specify whether to use the Wireless Multimedia (WMM) standard to
(WMM) prioritize traffic from WMM-compliant multimedia applications:
•
•
Chapter 7: Configuring a Wireless Network
ype the smallest IP packet si
multiple wireless stati ons are in range of the access point, but not in range
ereby causing data collisions and failures. RTS e
clear before the each packet is se
yo ur n etwork is congested, and the use
t t RTS threshold to a low value (around 500).
Disabled. XR
mode is disabled.
Enabled. XR mode is enabled. XR will be automatically
negotiated with XR-e
needed. This is the default.
Disabled. WMM is disabled. This is the default.
Enabled. WMM is enabled. The NetDefend firewall will prioritize
multimedia traffic according to four access categories (Voice,
Video, Best Effort, and Background). This allows for smoother
streaming of voice and video when using WMM aware
applications.
ze for which a station must send an RTS
nt.
rs are distant from one another,
entation threshold effectively disables
nabled wireless stations and used as
Manually Configuring a WLAN
nsures that the channel
175